Alternating Current MCQ Questions & Answers in Electrostatics and Magnetism | Physics
Learn Alternating Current MCQ questions & answers in Electrostatics and Magnetism are available for students perparing for IIT-JEE, NEET, Engineering and Medical Enternace exam.
121.
In an $$a.c.$$ circuit the voltage applied is $$E = {E_0}\sin \omega t.$$ The resulting current in the circuit is $$I = {I_0}\sin \left( {\omega t - \frac{\pi }{2}} \right).$$ The power consumption in the circuit is given by
A
$$P = \sqrt 2 {E_0}{I_0}$$
B
$$P = \frac{{{E_0}{I_0}}}{{\sqrt 2 }}$$
C
$$P = {\text{zero}}$$
D
$$P = \frac{{{E_0}{I_0}}}{2}$$
Answer :
$$P = {\text{zero}}$$
KEY CONCEPT: We know that power consumed in $$a.c.$$ circuit is given by, $$P = {E_{rms}}.{I_{rms}}\cos \phi $$
Here, $$E = {E_0}\sin \omega t$$
$$I = {I_0}\sin \left( {\omega t - \frac{\pi }{2}} \right)$$
which implies that the phase difference, $$\phi = \frac{\pi }{2}$$
$$\therefore P = {E_{rms}}.{I_{rms}}\cos \frac{\pi }{2} = 0\,\,\,\,\,\left( {\because \cos \frac{\pi }{2} = 0} \right)$$
122.
In given $$RC$$ circuit, capacitance of capacitor $${C_1} = 3\mu F$$ and $${C_2} = 1\mu F.$$ It is given that time constant of circuit between $$A$$ and $$B$$ is 3 millisecond. Value of $$R$$ will be
A
$$1\Omega $$
B
$$10\Omega $$
C
$$100\Omega $$
D
$$1000\Omega $$
Answer :
$$1000\Omega $$
Equivalent circuit can be drawn as below
$$\eqalign{
& RC = 3 \times {10^{ - 3}}\sec \cr
& R \times 3 \times {10^{ - 6}} = 3 \times {10^{ - 3}} \cr
& R = 1000\Omega \cr} $$
123.
The primary winding of transformer has 500 turns whereas its secondary has 5000 turns. The primary is connected to an $$AC$$ supply of $$20\,V-50\,Hz.$$ The secondary will have an output of
A
$$2\,V,5\,Hz$$
B
$$200\,V,500\,Hz$$
C
$$2\,V,50\,Hz$$
D
$$200\,V,50\,Hz$$
Answer :
$$200\,V,50\,Hz$$
The transformer converts $$AC$$ high voltage into $$AC$$ low voltage, but it does not cause any change in frequency.
The ratio of voltage across input with output voltage is given by
$$\frac{{{V_s}}}{{{V_p}}} = \frac{{{N_s}}}{{{N_p}}}$$
$${{N_s}} =$$ No. of turns in secondary coil
$${{N_p}} =$$ No. of turns in primary coil
Making substitution, we obtain
$$\eqalign{
& {V_s} = \frac{{{N_s}}}{{{N_p}}}{V_p} \cr
& = \frac{{5000}}{{500}} \times 20 \cr
& = 200\,V \cr} $$
Thus, output has voltage $$200\,V$$ and frequency $$50\,Hz.$$
124.
The current in an $$L-R$$ circuit builds up to $${\left( {\frac{3}{4}} \right)^{th}}$$ of its steady state value in 4 seconds. The time constant of this circuit is
125.
A coil of self-inductance $$L$$ is connected in series with a bulb $$B$$ and an $$AC$$ source. Brightness of the bulb decreases when
A
frequency of the $$AC$$ source is decreased
B
number of turns in the coil is reduced
C
a capacitance of reactance $${X_C} = {X_L}$$ is included in the same circuit
D
an iron rod is inserted in the coil
Answer :
an iron rod is inserted in the coil
When a bulb of resistance $$R$$ is connected in series with a coil of self-inductance $$L,$$ then current in the circuit is given by
$$I = \frac{E}{{\sqrt {{\omega ^2}{L^2} + {R^2}} }},$$ where $$E$$ is the voltage of an $$AC$$ source
As $$L = \frac{{{\mu _0}{\mu _r}{N^2}A}}{l}$$
$$ \Rightarrow L \propto {\mu _r}$$
When iron rod is inserted, $$L$$ increases, therefore current $$I$$ decreases.