Thermodynamics MCQ Questions & Answers in Heat and Thermodynamics | Physics
Learn Thermodynamics MCQ questions & answers in Heat and Thermodynamics are available for students perparing for IIT-JEE, NEET, Engineering and Medical Enternace exam.
161.
The pressure inside a tyre is 4 times that of atmosphere. If the tyre bursts suddenly at temperature $$300\,K,$$ what will be the new temperature?
162.
A Carnot engine, having an efficiency of $$\eta = \frac{1}{{10}}$$ as heat engine, is used as a refrigerator. If the work done on the system is 10 $$J,$$ the amount of energy absorbed from the reservoir at lower temperature is
A
$$100\, J$$
B
$$99\, J$$
C
$$90\, J$$
D
$$1\, J$$
Answer :
$$90\, J$$
The efficiency $$\left( \eta \right)$$ of a Carnot engine and the co - efficient of performance $$\left( \beta \right)$$ of a refrigerator are related as
$$\eqalign{
& \beta = \frac{{1 - \eta }}{\eta } \cr
& {\text{Here, }}\eta = \frac{1}{{10}} \cr
& \therefore \,\,\beta = \frac{{1 - \frac{1}{{10}}}}{{\left( {\frac{1}{{10}}} \right)}} \cr
& = 9. \cr} $$
Also, Co - efficient of performance $$\left( \beta \right)$$ is given by $$\beta = \frac{{{Q_2}}}{W},$$
where $${{Q_2}}$$ is the energy absorbed from the reservoir.
$$\eqalign{
& {\text{or, }}9 = \frac{{{Q_2}}}{{10}} \cr
& \therefore \,\,{Q_2} = 90\,J. \cr} $$
163.
Two moles of ideal helium gas are in a rubber balloon at $$30°C.$$ The balloon is fully expandable and can be assumed to require no energy in its expansion. The temperature of the gas in the balloon is slowly changed to $$35°C.$$ The amount of heat required in raising the temperature is nearly (take $$R = 8.31\, J /mol. K$$ )
164.
Helium gas goes through a cycle $$ABCDA$$ (consisting of
two isochoric and isobaric lines) as shown in figure
Efficiency of this cycle is nearly : (Assume the gas to be
close to ideal gas)
165.
The coefficient of performance of a refrigerator is 5. If the temperature inside freezer is $$ - {20^ \circ }C,$$ the temperature of the surroundings to which it rejects heat is
A
$${31^ \circ }C$$
B
$${41^ \circ }C$$
C
$${11^ \circ }C$$
D
$${21^ \circ }C$$
Answer :
$${31^ \circ }C$$
Key Concept
Coefficient of performance $$\left( \beta \right)$$ of a refrigerator is defined as the ratio of quantity of heat removed per cycle $$\left( {{Q_2}} \right)$$ to the work done on the working substance per cycle to remove this heat.
Given, coefficient of performance of a refrigerator, $$\beta = 5$$
Temperature of surface, i.e. inside freezer,
$${T_2} = - {20^ \circ }C = - 20 + 273 = 253\,K$$
Temperature of surrounding, i.e. heat rejected outside $${T_1} = ?$$
$$\eqalign{
& {\text{So,}}\,\,\beta = \frac{{{T_2}}}{{{T_1} - {T_2}}} \Rightarrow 5 = \frac{{253}}{{{T_1} - 253}} \cr
& \Rightarrow 5{T_1} - 1265 = 253 \cr
& \Rightarrow 5{T_1} = 1518 \cr
& {T_1} = \frac{{1518}}{5} = 303.6\,K \cr
& {T_1} = 303.6 - 273 = {31^ \circ }C \cr} $$
166.
The work of $$146 kJ$$ is performed in order to compress one kilo mole of gas adiabatically and in this process the temperature of the gas increases by $${7^ \circ }C.$$ The gas is $$\left( {R = 8.3\,\,J\,mo{l^{ - 1}}{K^{ - 1}}} \right)$$
167.
The efficiency of Carnot engine is $$50\% $$ and temperature of sink is $$500\,K.$$ If the temperature of source is kept constant and its efficiency is to be raised to $$60\% ,$$ then the required temperature of the sink will be
A
$$600\,K$$
B
$$500\,K$$
C
$$400\,K$$
D
$$100\,K$$
Answer :
$$400\,K$$
Efficiency of the Carnot engine is given by
$$\eta = 1 - \frac{{{T_2}}}{{{T_1}}}\,......\left( {\text{i}} \right)$$
where, $${{T_1}} =$$ temperature of source
$${{T_2}} =$$ temperature of sink
Given, $$\eta = 50\% = 0.5,\,{T_2} = 500\,K$$
Substituting in Eq. (i), we have
$$\eqalign{
& 0.5 = 1 - \frac{{500}}{{{T_1}}}\,\,{\text{or}}\,\,\frac{{500}}{{{T_1}}} = 0.5 \cr
& \therefore {T_1} = \frac{{500}}{{0.5}} = 1000\,K \cr} $$
Now, the temperature of sink is changed to $${{T'}_2}$$ and the efficiency becomes $$60\% $$ i.e., 0.6.
Using Eq. (i), we get
$$\eqalign{
& 0.6 = 1 - \frac{{{{T'}_2}}}{{1000}} \cr
& {\text{or}}\,\frac{{{{T'}_2}}}{{1000}} = 1 - 0.6 = 0.4\,\,{\text{or}}\,\,{{T'}_2} = 0.4 \times 100 = 4000\,K \cr} $$ NOTE
Carnot engine is not a practical engine because many ideal situations have been assumed while designing this engine which cannot be obtained practically.
168.
First law of thermodynamics is a consequence of conservation of
A
work
B
energy
C
heat
D
All of these
Answer :
energy
According to the first law of thermodynamics, when some quantity of heat $$\left( {dQ} \right)$$ is supplied to a system capable of doing external work, then the quantity of heat absorbed by the system $$\left( {dQ} \right)$$ is equal to the sum of the increase in the internal energy of the system $$\left( {dU} \right)$$ due to rise in temperature and the external work done by the system $$\left( {dQ} \right)$$ in expansion,
i.e. $$dQ = dU + dW$$
This law, which is basically the law of conservation of energy applies to every process in nature.
169.
A diatomic gas initially at $${18^ \circ }C$$ is compressed adiabatically to one-eight of its original volume. The temperature after compression will be
A
$${18^ \circ }C$$
B
$$668.4\,K$$
C
$${395.4^ \circ }C$$
D
$${144^ \circ }C$$
Answer :
$$668.4\,K$$
According to adiabatic process the relation between temperature and volume is given by $$T{V^{\gamma - 1}} = {\text{constant}}$$
So, for two different cases
$$\therefore {T_1}V_1^{\gamma - 1} = {T_2}V_2^{\gamma - 1}\,......\left( {\text{i}} \right)$$
Given, initial temperature $${T_1} = {18^ \circ }C = 291\,K$$
Let initial volume $${V_1} = V$$
and final volume $${V_2} = \left( {\frac{1}{8}} \right)V$$
Putting these values in Eq. (i)
$$\eqalign{
& {T_2} = 291{\left( {\frac{{{V_1}}}{{{V_2}}}} \right)^{\gamma - 1}} = 291{\left( {\frac{V}{{\left( {\frac{1}{8}} \right)V}}} \right)^{\frac{7}{5} - 1}}\,\,\left( {\gamma = \frac{7}{5}{\text{for}}\,{\text{diatomic}}\,{\text{gas}}} \right) \cr
& = 291 \times 2.297 = 668.4\,K \cr} $$
170.
The $$P-V$$ diagram of a gas system undergoing cyclic process is shown here. The work done during isobaric compression is
A
$$100\,J$$
B
$$200\,J$$
C
$$600\,J$$
D
$$400\,J$$
Answer :
$$400\,J$$
Isobaric compression is represented by curve $$AO$$
Work done = area under $$AD$$
$$ = 2 \times {10^2} \times \left( {3 - 1} \right) = 4 \times {10^2} = 400\,J.$$